Home > Event Id > Event Id 11 Source Disk Windows Server 2008

Event Id 11 Source Disk Windows Server 2008

Contents

Even with 5 minutes per server (to check the logs and other parameters), it may take an hour to make sure that everything is ok and no "red lights" are blinking x 723 Glauber From a newsgroup post: "A Buggy NForce SATA driver caused the problem. I am wondering why a removable drive is picking up a controller error simply when someone logs into the server. –Az. x 688 Gavin Seabrook In my case, the games were randomly shutting down and sometimes window pop-ups occurred saying Delayed Write Failure. Check This Out

To solve the error, a full SMART scan with repair (reallocation of unstable sectors) should be performed. As per Microsoft: "This problem occurs if you have installed one or more storage devices that do not support cache commands. also check for any drive issues in device manager. See the link to "Abit Forum Thread" for some other useful information. https://social.technet.microsoft.com/Forums/office/en-US/bd911c13-618b-4c39-b675-c5a6254e2fef/windows-2008-event-id-11-disk-error?forum=winservergen

Event Id 11 Disk Controller Error

Conflicting devices are indicated by an exclamation or question mark in the device manager list. I get this error sometimes but it never causes any problems". I'll try to disable this function for a few days, and let you know what happens... This posting is provided "AS IS" with no warranties or guarantees and confers no rights.

I later noticed w/o any USB drives plugged in that the errors stopped happening. Hope this helps. From a newsgroup post: "If you have Intel's Application Accelerator installed this is what can cause the error. Event Id 11 Atapi This resulted in the SCSI BIOS taking a long time to run and eventually timed out.

When the "Broken" mirror set is inserted back into the SAN for remirroring, you will see this occur. However, I should have mentioned that I had scanned those kbs, but dismissed them as I don't have SCSI, RAID or Clusters. When I disabled all these devices, the problem went away on all drives. see here Same drive inserted multiple times into the same port will have same DR.

See ME895573 to get the hotfix. Event Id 11 Wininit The hardware problems can be associated with poor cabling, incorrect termination or transfer rate settings, lazy or slow device responses to relinquish the SCSI bus, a faulty device, or, in very x 681 EventID.Net This event may occur when you try to write data to a Serial Bus Protocol 2 (SBP-2) device, such as an IEEE (Institute of Electrical and Electronics Engineers) x 658 Al Marklin This error is generated along with EventID 32 from source Disk (and erroneously error 34), when Windows 2000 SP4 is installed in a system with and Iomega

Event Id 11, Disk: The Driver Detected A Controller Error

But I don't think ignoring these errors is a good strategy.After reading some MS forum I tried this: Set service "Windows Driver Foundation User mode Driver Framework" to automatic (wudfsvc). http://www.eventid.net/display-eventid-11-source-Disk-eventno-616-phase-1.htm x 129 Giles Collard I have had the above Event ID on my system logs which would show up as soon as the system had booted and at random times there Event Id 11 Disk Controller Error VMware Advertise Here 633 members asked questions and received personalized solutions in the past 7 days. Event Id 11 The Driver Detected A Controller Error On Device Harddisk1 Dr1 in argument of macro or environment Why do shampoo ingredient labels feature the the term "Aqua"?

that should help. his comment is here x 694 Dave Murphy In testing a new configuration on our terminal servers, we ran into this error under moderate user load. I use DISKPART: CMD > DISKPART list disk 0 Pimiento OP slacka Feb 3, 2014 at 5:57 UTC 1st Post I just read all of the answers, even Any clue?So I'm left with the regular Windows method of enabling/disabling the sleep mode (for the record it's here: Control Panel / Device Manager / Universal Serial Bus controllers / Generic Event Id 11 Windows 7

Tried swapping drives, cables, ports and reinstalling the system on a clean disk. You should also check out the first comment here: http://www.eventid.net/display.asp?eventid=11&eventno=616&source=Disk&phase=1. On eject Sytem posts a Event ID 11 error almost without fail... http://computerhelpdev.com/event-id/event-id-50-source-termdd-windows-2008.php The Properties will contain "Device Type" information that will tell you if the disk is IDE or SCSI, and it will also display the "Hardware Vendor" name of the physical device

Please try the request again. Event Id 11 Custom Dynamic Link Libraries Possible solutions include: Uninstall the Intel driver and reinstall after Roxio EZCD Creator, simple do not use the Intel driver. Luckily I found the reason after trying every solution I found on the Internet.

Logged fdlwebmaster Calf Posts: 5 Re: EventID 11 The driver detected a controller error on my DriveStation HD-WL2TU3 « Reply #1 on: December 23, 2013, 09:57:19 am » I tried to

Creating your account only takes a few minutes. Boot-up returned to normal speed and errors went away after disconnecting the card reader. need to really see the setup to make things easier. Event Id 11 Server 2008 R2 If you have only one drive, ensure you do not have it configured to cable select and update to the latest IDE drivers from your motherboard manufacturer".

x 263 Anonymous Replacing the IDE cable helped me to fix this error. The most prominent omission from your valuable contribution is the Microsoft troubleshooter. Join the community Back I agree Powerful tools you need, all for free. http://computerhelpdev.com/event-id/windows-event-id-11-source-disk.php Re: EventID 11 The driver detected a controller error on my DriveStation HD-WL2TU3 « Reply #2 on: December 28, 2013, 05:10:54 am » How many drive letters are you using?

x 259 Anonymous In my case, after I disabled S.M.A.R.T. When I bypass the hub and go straight to the PC it does not happen. If these events are logged regularly on a primary system drive, replace the device. About Event ID:11 http://www.microsoft.com/technet/support/ee/transform.aspx?ProdName=Windows%20Operating%20System&ProdVer=5.2.3790.1830&EvtID=11&EvtSrc=disk&LCID=1033 Troubleshoot event ID 11 error message http://support.microsoft.com/kb/154690/en-us Hope this helps!

monitoring on that computer if you don't have any other SATA drives in the computer. By creating an account, you're agreeing to our Terms of Use and our Privacy Policy Not a member? The driver detected a controller error on \Device\Harddisk1\DR1. It seems to be only 1 drive at a time that will throw this error. 1)THE DRIVES HAVE ALL BEEN VERIFIED CLEAN WITH MULTIPLE CHKDSKS 2)THE MOTHERBOARD ON THE SERVER HAS

Dealing with "friend" who won't pay after delivery despite signed contracts Conflicting definitions of quasipolynomial time Which was the last major war in which horse mounted cavalry actually participated in active At seemingly random times, my computer would lock itself solid. Go to Solution 3 3 Participants mgedlaman(3 comments) speshalyst LVL 16 MS Server OS7 Windows Server 20083 VMware1 predragpetrovic LVL 9 VMware4 Windows Server 20081 MS Server OS1 5 Comments Ultimate Australian Canal 12 hour to 24 hour time converter Is there any way to take stable Long exposure photos without using Tripod?

Weird CentOS server behavior time zones Can the integral of a function be larger than function itself? Why are copper cables round? From a newsgroup post: "I had event 11 errors and it was a bug in my IBM ServeRaid firmware. x 275 Corey Monteiro Boot-up was also very slow when these errors began to occur.

That's the first place I looked but I'm unsure how to correlate Harddisk2\DR2 to any of those drives. Any advice on the cause, better still, a solution? I have HP RAID management software but it didn't really help either since I have so many other hard drives (USB, iSCSI) that are not on the internal RAID. Further investigation revealed Windows 2000 is generating (1E) Prevent/Allow Medium Removal commands to the boot device.

When users are logging in to a Standalone Windows 2008 R2 server in workgroup configuration, it causes the following error: Event Log: System Event Source: Disk Event ID: 11 Research Severity: x 274 Lihai Feng This problem confused me for weeks.